TAF: EpicorDBUpgrade


(system) #1

Never mind, I’ve figured this out. Thank you for your time.

 

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of jim_chance@...
Sent: Tuesday, September 24, 2013 11:12 PM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: TAF: EpicorDBUpgrade

 

 

Where did you find the location of EpicorDBUpgrade.exe?  



---In vantage@yahoogroups.com, <vantage@yahoogroups.com> wrote:

I am having problems with the EpicorDBUpgrade utility.


1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i. Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i. (Unchecked) - Skip Database Restore

ii. Move to local: C:\SQLServerBackups\<pick>.bak

iii. UOM Database Backup Location: c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance TAF2K8DATACONV

i. Authentication Mode: Windows Authentication



At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not compatible with the production database version. Please select the correct instance.



Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)



William R. King
IT Analyst
Topura America Fastener, Inc.




[Non-text portions of this message have been removed]


(system) #2
I am having problems with the EpicorDBUpgrade utility.


1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i. Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i. (Unchecked) - Skip Database Restore

ii. Move to local: C:\SQLServerBackups\<pick>.bak

iii. UOM Database Backup Location: c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance TAF2K8DATACONV

i. Authentication Mode: Windows Authentication



At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not compatible with the production database version. Please select the correct instance.



Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)



William R. King
IT Analyst
Topura America Fastener, Inc.




[Non-text portions of this message have been removed]

(system) #3
SQL 2012 is only supported for Version 9.05.702+

So that is probably why this is happening because that upgrade is running on
a 9.04 Epicor installation, it's just bundled with the 9.05 install.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
William King
Sent: Monday, August 05, 2013 11:39 AM
To: vantage@yahoogroups.com
Subject: [Vantage] TAF: EpicorDBUpgrade

I am having problems with the EpicorDBUpgrade utility.


1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i.
Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i.
(Unchecked) - Skip Database Restore

ii. Move
to local: C:\SQLServerBackups\<pick>.bak

iii. UOM
Database Backup Location:
c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use
default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance
TAF2K8DATACONV

i.
Authentication Mode: Windows Authentication



At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not
compatible with the production database version. Please select the correct
instance.



Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)



William R. King
IT Analyst
Topura America Fastener, Inc.




[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

(system) #4
Thanks, that was it.

Installed SQL 2008 R2 and all it working.

William R. King
IT Analyst
Topura America Fastener, Inc.
1070 Monterey Court - Bowling Green, KY 42101
Voice: 270-901-1579 Fax: 270-781-3150 (ATTN: Will King)




From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Ned
Sent: Monday, August 05, 2013 12:01 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade



SQL 2012 is only supported for Version 9.05.702+

So that is probably why this is happening because that upgrade is running on
a 9.04 Epicor installation, it's just bundled with the 9.05 install.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
William King
Sent: Monday, August 05, 2013 11:39 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] TAF: EpicorDBUpgrade

I am having problems with the EpicorDBUpgrade utility.

1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i.
Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i.
(Unchecked) - Skip Database Restore

ii. Move
to local: C:\SQLServerBackups\<pick>.bak

iii. UOM
Database Backup Location:
c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use
default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance
TAF2K8DATACONV

i.
Authentication Mode: Windows Authentication

At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not
compatible with the production database version. Please select the correct
instance.

Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)

William R. King
IT Analyst
Topura America Fastener, Inc.

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]

(system) #5
Now I am getting an errors during the installing which states

RESTORE DATABASE [EpicorDataUpgDB] From Disk = ....

It just hangs and doesn't go any further.

I don't see any hidden boxes or anything else.

I am up for suggestions. I also have a call into EPICOR.


William R. King
IT Analyst
Topura America Fastener, Inc.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of William King
Sent: Monday, August 05, 2013 1:31 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade



Thanks, that was it.

Installed SQL 2008 R2 and all it working.

William R. King
IT Analyst
Topura America Fastener, Inc.
1070 Monterey Court - Bowling Green, KY 42101
Voice: 270-901-1579 Fax: 270-781-3150 (ATTN: Will King)

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Ned
Sent: Monday, August 05, 2013 12:01 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

SQL 2012 is only supported for Version 9.05.702+

So that is probably why this is happening because that upgrade is running on
a 9.04 Epicor installation, it's just bundled with the 9.05 install.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of
William King
Sent: Monday, August 05, 2013 11:39 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: [Vantage] TAF: EpicorDBUpgrade

I am having problems with the EpicorDBUpgrade utility.

1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i.
Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i.
(Unchecked) - Skip Database Restore

ii. Move
to local: C:\SQLServerBackups\<pick>.bak

iii. UOM
Database Backup Location:
c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use
default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance
TAF2K8DATACONV

i.
Authentication Mode: Windows Authentication

At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not
compatible with the production database version. Please select the correct
instance.

Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)

William R. King
IT Analyst
Topura America Fastener, Inc.

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]

(system) #6
Might be an issue putting the SQL DB in place, either because your user
doesn't have permission, or because there is already a DB there with the
same name.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
William King
Sent: Monday, August 05, 2013 5:41 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Now I am getting an errors during the installing which states

RESTORE DATABASE [EpicorDataUpgDB] From Disk = ....

It just hangs and doesn't go any further.

I don't see any hidden boxes or anything else.

I am up for suggestions. I also have a call into EPICOR.


William R. King
IT Analyst
Topura America Fastener, Inc.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
William King
Sent: Monday, August 05, 2013 1:31 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade



Thanks, that was it.

Installed SQL 2008 R2 and all it working.

William R. King
IT Analyst
Topura America Fastener, Inc.
1070 Monterey Court - Bowling Green, KY 42101
Voice: 270-901-1579 Fax: 270-781-3150 (ATTN: Will King)

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of Ned
Sent: Monday, August 05, 2013 12:01 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

SQL 2012 is only supported for Version 9.05.702+

So that is probably why this is happening because that upgrade is running on
a 9.04 Epicor installation, it's just bundled with the 9.05 install.

-----Original Message-----
From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of William King
Sent: Monday, August 05, 2013 11:39 AM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
Subject: [Vantage] TAF: EpicorDBUpgrade

I am having problems with the EpicorDBUpgrade utility.

1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i.
Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i.
(Unchecked) - Skip Database Restore

ii. Move
to local: C:\SQLServerBackups\<pick>.bak

iii. UOM
Database Backup Location:
c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use
default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance
TAF2K8DATACONV

i.
Authentication Mode: Windows Authentication

At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not compatible with the production
database version. Please select the correct instance.

Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)

William R. King
IT Analyst
Topura America Fastener, Inc.

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

(system) #7
All permissions seems well. The ODBC connection that the EpicorDBUpgrade.exe creates is not Testing successfully. I changed to the sa and still fails.
The EpicorDataUpgDB is being created by the EpicorDBUpgrade.exe and when I go to the SQL Server Mgt Studio and R-Click the DB and get to the properties. General is all that shows up. I also get the "Database is not accessible" error when attempting to "look" at the SQL EpicorDataUpgDB .

Am I missing a step somewhere?


William R. King
IT Analyst
Topura America Fastener, Inc.
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Ned
Sent: Monday, August 05, 2013 6:52 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade



Might be an issue putting the SQL DB in place, either because your user
doesn't have permission, or because there is already a DB there with the
same name.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
William King
Sent: Monday, August 05, 2013 5:41 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Now I am getting an errors during the installing which states

RESTORE DATABASE [EpicorDataUpgDB] From Disk = ....

It just hangs and doesn't go any further.

I don't see any hidden boxes or anything else.

I am up for suggestions. I also have a call into EPICOR.

William R. King
IT Analyst
Topura America Fastener, Inc.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
William King
Sent: Monday, August 05, 2013 1:31 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Thanks, that was it.

Installed SQL 2008 R2 and all it working.

William R. King
IT Analyst
Topura America Fastener, Inc.
1070 Monterey Court - Bowling Green, KY 42101
Voice: 270-901-1579 Fax: 270-781-3150 (ATTN: Will King)

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf
Of Ned
Sent: Monday, August 05, 2013 12:01 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

SQL 2012 is only supported for Version 9.05.702+

So that is probably why this is happening because that upgrade is running on
a 9.04 Epicor installation, it's just bundled with the 9.05 install.

-----Original Message-----
From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of William King
Sent: Monday, August 05, 2013 11:39 AM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
Subject: [Vantage] TAF: EpicorDBUpgrade

I am having problems with the EpicorDBUpgrade utility.

1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i.
Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i.
(Unchecked) - Skip Database Restore

ii. Move
to local: C:\SQLServerBackups\<pick>.bak

iii. UOM
Database Backup Location:
c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use
default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance
TAF2K8DATACONV

i.
Authentication Mode: Windows Authentication

At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not compatible with the production
database version. Please select the correct instance.

Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)

William R. King
IT Analyst
Topura America Fastener, Inc.

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]

(system) #8
Sounds like the user you are logged in as doesn't have sysadmin rights and
you may not have turned on both SQL and NT Authentication in SQL if the SA
is not working...

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
William King
Sent: Tuesday, August 06, 2013 2:18 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

All permissions seems well. The ODBC connection that the EpicorDBUpgrade.exe
creates is not Testing successfully. I changed to the sa and still fails.
The EpicorDataUpgDB is being created by the EpicorDBUpgrade.exe and when I
go to the SQL Server Mgt Studio and R-Click the DB and get to the
properties. General is all that shows up. I also get the "Database is not
accessible" error when attempting to "look" at the SQL EpicorDataUpgDB .

Am I missing a step somewhere?


William R. King
IT Analyst
Topura America Fastener, Inc.
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Ned
Sent: Monday, August 05, 2013 6:52 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade



Might be an issue putting the SQL DB in place, either because your user
doesn't have permission, or because there is already a DB there with the
same name.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of William King
Sent: Monday, August 05, 2013 5:41 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Now I am getting an errors during the installing which states

RESTORE DATABASE [EpicorDataUpgDB] From Disk = ....

It just hangs and doesn't go any further.

I don't see any hidden boxes or anything else.

I am up for suggestions. I also have a call into EPICOR.

William R. King
IT Analyst
Topura America Fastener, Inc.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of William King
Sent: Monday, August 05, 2013 1:31 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Thanks, that was it.

Installed SQL 2008 R2 and all it working.

William R. King
IT Analyst
Topura America Fastener, Inc.
1070 Monterey Court - Bowling Green, KY 42101
Voice: 270-901-1579 Fax: 270-781-3150 (ATTN: Will King)

From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of Ned
Sent: Monday, August 05, 2013 12:01 PM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

SQL 2012 is only supported for Version 9.05.702+

So that is probably why this is happening because that upgrade is running on
a 9.04 Epicor installation, it's just bundled with the 9.05 install.

-----Original Message-----
From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of William King
Sent: Monday, August 05, 2013 11:39 AM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com>
Subject: [Vantage] TAF: EpicorDBUpgrade

I am having problems with the EpicorDBUpgrade utility.

1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i.
Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i.
(Unchecked) - Skip Database Restore

ii. Move
to local: C:\SQLServerBackups\<pick>.bak

iii. UOM
Database Backup Location:
c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use
default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance
TAF2K8DATACONV

i.
Authentication Mode: Windows Authentication

At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not compatible with the production
database version. Please select the correct instance.

Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)

William R. King
IT Analyst
Topura America Fastener, Inc.

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/
vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

(system) #9
Epicor support told me to skip the restore do it manually. This is the second time I went through the Data Upgrade process and the EpicorDBUpgrade tool handled it last time <scratch head>. Oh well.

No problem. Completed.

Now I am having the following problem.

I am Using the Epicor Data Upgrade Utility Guide 9.05.700

I made it through that process and ran the Schema change with no problem. I am at the part with the 904EpicorDataUpgAS needs started.

I get an error stating
Broker start up failed for 904EpicorDataUpAS.

See Broker log file for details. (attached.)

I'll plug away and await suggestions.


William R. King
IT Analyst
Topura America Fastener, Inc.
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Ned
Sent: Tuesday, August 06, 2013 1:48 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade



Sounds like the user you are logged in as doesn't have sysadmin rights and
you may not have turned on both SQL and NT Authentication in SQL if the SA
is not working...

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
William King
Sent: Tuesday, August 06, 2013 2:18 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

All permissions seems well. The ODBC connection that the EpicorDBUpgrade.exe
creates is not Testing successfully. I changed to the sa and still fails.
The EpicorDataUpgDB is being created by the EpicorDBUpgrade.exe and when I
go to the SQL Server Mgt Studio and R-Click the DB and get to the
properties. General is all that shows up. I also get the "Database is not
accessible" error when attempting to "look" at the SQL EpicorDataUpgDB .

Am I missing a step somewhere?

William R. King
IT Analyst
Topura America Fastener, Inc.
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
Ned
Sent: Monday, August 05, 2013 6:52 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Might be an issue putting the SQL DB in place, either because your user
doesn't have permission, or because there is already a DB there with the
same name.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf
Of William King
Sent: Monday, August 05, 2013 5:41 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Now I am getting an errors during the installing which states

RESTORE DATABASE [EpicorDataUpgDB] From Disk = ....

It just hangs and doesn't go any further.

I don't see any hidden boxes or anything else.

I am up for suggestions. I also have a call into EPICOR.

William R. King
IT Analyst
Topura America Fastener, Inc.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf
Of William King
Sent: Monday, August 05, 2013 1:31 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Thanks, that was it.

Installed SQL 2008 R2 and all it working.

William R. King
IT Analyst
Topura America Fastener, Inc.
1070 Monterey Court - Bowling Green, KY 42101
Voice: 270-901-1579 Fax: 270-781-3150 (ATTN: Will King)

From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of Ned
Sent: Monday, August 05, 2013 12:01 PM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

SQL 2012 is only supported for Version 9.05.702+

So that is probably why this is happening because that upgrade is running on
a 9.04 Epicor installation, it's just bundled with the 9.05 install.

-----Original Message-----
From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com<mailto:vantage%40y%0bahoogroups.com>>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of William King
Sent: Monday, August 05, 2013 11:39 AM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com<mailto:vantage%40y%0bahoogroups.com>>
Subject: [Vantage] TAF: EpicorDBUpgrade

I am having problems with the EpicorDBUpgrade utility.

1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i.
Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i.
(Unchecked) - Skip Database Restore

ii. Move
to local: C:\SQLServerBackups\<pick>.bak

iii. UOM
Database Backup Location:
c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use
default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance
TAF2K8DATACONV

i.
Authentication Mode: Windows Authentication

At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not compatible with the production
database version. Please select the correct instance.

Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)

William R. King
IT Analyst
Topura America Fastener, Inc.

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/
vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]

(system) #10
Attachments don't come through to the group.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
William King
Sent: Thursday, August 08, 2013 11:42 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Epicor support told me to skip the restore do it manually. This is the
second time I went through the Data Upgrade process and the EpicorDBUpgrade
tool handled it last time <scratch head>. Oh well.

No problem. Completed.

Now I am having the following problem.

I am Using the Epicor Data Upgrade Utility Guide 9.05.700

I made it through that process and ran the Schema change with no problem. I
am at the part with the 904EpicorDataUpgAS needs started.

I get an error stating
Broker start up failed for 904EpicorDataUpAS.

See Broker log file for details. (attached.)

I'll plug away and await suggestions.


William R. King
IT Analyst
Topura America Fastener, Inc.
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Ned
Sent: Tuesday, August 06, 2013 1:48 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] TAF: EpicorDBUpgrade



Sounds like the user you are logged in as doesn't have sysadmin rights and
you may not have turned on both SQL and NT Authentication in SQL if the SA
is not working...

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of William King
Sent: Tuesday, August 06, 2013 2:18 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

All permissions seems well. The ODBC connection that the EpicorDBUpgrade.exe
creates is not Testing successfully. I changed to the sa and still fails.
The EpicorDataUpgDB is being created by the EpicorDBUpgrade.exe and when I
go to the SQL Server Mgt Studio and R-Click the DB and get to the
properties. General is all that shows up. I also get the "Database is not
accessible" error when attempting to "look" at the SQL EpicorDataUpgDB .

Am I missing a step somewhere?

William R. King
IT Analyst
Topura America Fastener, Inc.
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of Ned
Sent: Monday, August 05, 2013 6:52 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Might be an issue putting the SQL DB in place, either because your user
doesn't have permission, or because there is already a DB there with the
same name.

-----Original Message-----
From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of William King
Sent: Monday, August 05, 2013 5:41 PM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Now I am getting an errors during the installing which states

RESTORE DATABASE [EpicorDataUpgDB] From Disk = ....

It just hangs and doesn't go any further.

I don't see any hidden boxes or anything else.

I am up for suggestions. I also have a call into EPICOR.

William R. King
IT Analyst
Topura America Fastener, Inc.

From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of William King
Sent: Monday, August 05, 2013 1:31 PM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

Thanks, that was it.

Installed SQL 2008 R2 and all it working.

William R. King
IT Analyst
Topura America Fastener, Inc.
1070 Monterey Court - Bowling Green, KY 42101
Voice: 270-901-1579 Fax: 270-781-3150 (ATTN: Will King)

From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of Ned
Sent: Monday, August 05, 2013 12:01 PM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com>
Subject: RE: [Vantage] TAF: EpicorDBUpgrade

SQL 2012 is only supported for Version 9.05.702+

So that is probably why this is happening because that upgrade is running on
a 9.04 Epicor installation, it's just bundled with the 9.05 install.

-----Original Message-----
From:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com<mailto:vantage%40y%0bahoogroups.com>>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com><mailto:van
tage%40yahoogroups.com>] On Behalf Of William King
Sent: Monday, August 05, 2013 11:39 AM
To:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com><mailto:vantage%40y
ahoogroups.com<mailto:vantage%40y%0bahoogroups.com>>
Subject: [Vantage] TAF: EpicorDBUpgrade

I am having problems with the EpicorDBUpgrade utility.

1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i.
Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i.
(Unchecked) - Skip Database Restore

ii. Move
to local: C:\SQLServerBackups\<pick>.bak

iii. UOM
Database Backup Location:
c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use
default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance
TAF2K8DATACONV

i.
Authentication Mode: Windows Authentication

At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not compatible with the production
database version. Please select the correct instance.

Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)

William R. King
IT Analyst
Topura America Fastener, Inc.

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/
vantage/files/><http://groups.yahoo.com/group/
vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/
vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

(system) #11

Where did you find the location of EpicorDBUpgrade.exe?  



---In vantage@yahoogroups.com, <vantage@yahoogroups.com> wrote:

I am having problems with the EpicorDBUpgrade utility.


1. I have generated the UOM in the 8.03 portion of the instruction.

2. Closed the conversion

3. Created the UOMDB backup by

a. #proenv> cd c:\epicor\mfgsys803\Clientserver\cv\

b. #proenv> probkup uomdb uomdb.bak

i. Backup stored at: c:\epicor\mfgsys803\Clientserver\cv\

4. Rebooted the Server

5. Started the OE 10.2A service.

a. Check process monitor and waited till service is running completely

6. Go to C:\Epicor\Epicor905\EpicorDBUpgrade

7. Run EpicorDBUpgrade.exe

a. Select NEXT --> on Welcome

b. SQL Database Backup Location

i. (Unchecked) - Skip Database Restore

ii. Move to local: C:\SQLServerBackups\<pick>.bak

iii. UOM Database Backup Location: c:\epicor\mfgsys803\Clientserver\cv\uomdb.bak

c. Install Database file to: <use default> C:\Epicor\Epicor905\db\Upgrade904

d. Select SQL Instance TAF2K8DATACONV

i. Authentication Mode: Windows Authentication



At this point I receive an error stating

SQL Instance Alert

The selected SQL Instance version is not compatible with the production database version. Please select the correct instance.



Environment: (all Self Contained)

TAF2K8DATACONV

Windows 2008 Server R2 Enterprise SP1 (64 bit)

6 processors

32 Gb RAM

SQL Server 2012 SP1 (64bit) version: 11.0.3128.0

8.03.409C environment

OE 10.1B 32bit (set to manual)

9.05.702A environment

OE 10.2B 32bit (set to manual)



William R. King
IT Analyst
Topura America Fastener, Inc.




[Non-text portions of this message have been removed]