Start Activity (Scan Barcode)

Yahoo Archive
1

What does your barcode look like?  In regular font not barcode font…

 

For example say job 1234 Assembly 0 oper 10…

                1243-0-10  what character do you use for the “-“

 

Or what’s the trigger character for Epicor to know where to parse the data?

 

 

 

 

Marco Vissuet

Systems Engineer

Pacific Contours Corporation

Cell (619)507-2311

Anaheim Office (714) 693-1260

San Diego Office (619)670-3900

Fax (714) 693-1252

mvissuet@...

http://www.pacificcontours.com/

 

"The information contained herein may be subject to the International Traffic in Arms Regulations (ITAR) Warning: - This document contains data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) as amended, or the Export Administration Act (Title 50, U.S.C., App 2401 et seq.) as amended. Violations of these export laws are subject to severe criminal and civil penalties.  Disseminate in accordance with provisions of DoD Directive 5230.25.

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Scotty K.
Sent: Monday, September 30, 2013 8:26 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Start Activity (Scan Barcode)

 

 

This may help you, but it's a little more work.

We use 2D barcodes containing several different pieces of information. So I created a field on every form that everyone scans into and created an on leave event that parses the data into the correct fields on the form using the forms dataview.

 

     Dim OprNumX as EpiCombo = CType(csm.GetNativeControlReference("4469529c-d636-4205-b17a-def6a7469d8f"), EpiCombo)
     Dim edv As EpiDataView = CType(oTrans.EpiDataViews("Start"), EpiDataView)

     edv.dataView(edv.Row).BeginEdit()
     edv.dataView(edv.Row)("JobNum") = ParsedScan(0)
     edv.dataView(edv.Row)("AssemblySeq") = ParsedScan(1)
     edv.dataView(edv.Row).EndEdit()
     edv.Notify(New EpiNotifyArgs(oTrans, edv.Row, edv.Column))
     OprNumX.focus()

 

 

On Mon, Sep 30, 2013 at 10:14 AM, Jose Gomez <jose@...> wrote:

 

The Epicor Code is hard coded to tab to a specific control. 



Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile

E: jose@...
http://www.josecgomez.com
      


Quis custodiet ipsos custodes?

 

On Mon, Sep 30, 2013 at 11:11 AM, Chang, Chia <cchang@...> wrote:

 

Did you try customizing the tab number ordering so that it tabs in the correct order?

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez
Sent: Monday, September 30, 2013 9:45 AM
To: Vantage
Subject: Re: [Vantage] Start Activity (Scan Barcode)

 

 

Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.



Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile

E: jose@...
http://www.josecgomez.com
      


Quis custodiet ipsos custodes?

 

On Mon, Sep 30, 2013 at 10:41 AM, Tony Hughes <thughes281@...> wrote:

 


Can you remove the combo boxes for assembly and sequence, and replace with text boxes?

From: Jose Gomez <jose@...>
To: Vantage <vantage@yahoogroups.com>

Sent: Thursday, September 26, 2013 2:29 PM

Subject: [Vantage] Start Activity (Scan Barcode)

 

 

Back in Vantage 6 (who knew I would ever utter those words) 

You could scan one long bar code such as JOBXXX-ASSY-SEQ

 

And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.

 

 

Has anyone worked around this?

 

 


Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile

E: jose@...
http://www.josecgomez.com
      


Quis custodiet ipsos custodes?

 

 

 

 

 

__________ Information from ESET NOD32 Antivirus, version of virus signature database 8860 (20130930) __________

 

The message was checked by ESET NOD32 Antivirus.

 

http://www.eset.com

2
Back in Vantage 6 (who knew I would ever utter those words)Â

You could scan one long bar code such as JOBXXX-ASSY-SEQ


And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.



Has anyone worked around this?




Jose C Gomez
Software Engineer


T: 904.469.1524 mobile

E: jose@...
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?
3

We ran into the same issue too.  We had to program into the scanner a 3 second pause after it scans in the job number into MES so that the system can validate the job number before scanning in the assembly and sequence with a single barcode.  It works the majority of the time except when the system is slow and the job validation takes longer than 3 seconds.

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez
Sent: Thursday, September 26, 2013 2:29 PM
To: Vantage
Subject: [Vantage] Start Activity (Scan Barcode)

 

 

Back in Vantage 6 (who knew I would ever utter those words) 

You could scan one long bar code such as JOBXXX-ASSY-SEQ

 

And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.

 

 

Has anyone worked around this?

 

 


Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile


Quis custodiet ipsos custodes?

4

Can you remove the combo boxes for assembly and sequence, and replace with text boxes?



From: Jose Gomez <jose@...>
To: Vantage <vantage@yahoogroups.com>
Sent: Thursday, September 26, 2013 2:29 PM
Subject: [Vantage] Start Activity (Scan Barcode)

  
<div id="ygrps-yiv-1388164243yiv3936850209ygrp-text">
  
  
  <div dir="ltr"><div class="ygrps-yiv-1388164243yiv3936850209gmail_default" style="font-family:verdana, sans-serif;font-size:small;">Back in Vantage 6 (who knew I would ever utter those words)&nbsp;</div><div class="ygrps-yiv-1388164243yiv3936850209gmail_default" style="font-family:verdana, sans-serif;font-size:small;">

You could scan one long bar code such as JOBXXX-ASSY-SEQ


And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.



Has anyone worked around this?




Jose C Gomez
Software Engineer


T: 904.469.1524 mobile

Quis custodiet ipsos custodes?
</div>


5
Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.


Jose C Gomez
Software Engineer


T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?


On Mon, Sep 30, 2013 at 10:41 AM, Tony Hughes <thughes281@...> wrote:

 
<div>
  
  
  <p></p><div style="font-size:12pt;font-family:Courier New, courier, monaco, monospace, sans-serif;"><br>Can you remove the combo boxes for assembly and sequence, and replace with text boxes? <br><br><br><br><div style="font-family:Courier New, courier, monaco, monospace, sans-serif;font-size:12pt;">
From: Jose Gomez <jose@...>

To: Vantage <vantage@yahoogroups.com>

Sent: Thursday, September 26, 2013 2:29 PM

Subject: [Vantage] Start Activity (Scan Barcode)

 
<div>
  
  
  <div dir="ltr"><div style="font-family:verdana, sans-serif;font-size:small;">Back in Vantage 6 (who knew I would ever utter those words)Â </div><div style="font-family:verdana, sans-serif;font-size:small;">

You could scan one long bar code such as JOBXXX-ASSY-SEQ


And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.



Has anyone worked around this?




Jose C Gomez
Software Engineer


T: 904.469.1524 mobile

E: jose@...
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?
</div>



</div>
 


<div style="color:#fff;min-height:0;"></div>

6

Did you try customizing the tab number ordering so that it tabs in the correct order?

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez
Sent: Monday, September 30, 2013 9:45 AM
To: Vantage
Subject: Re: [Vantage] Start Activity (Scan Barcode)

 

 

Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.



Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile


Quis custodiet ipsos custodes?

 

On Mon, Sep 30, 2013 at 10:41 AM, Tony Hughes <thughes281@...> wrote:

 


Can you remove the combo boxes for assembly and sequence, and replace with text boxes?


From: Jose Gomez <jose@...>
To: Vantage <vantage@yahoogroups.com>

Sent: Thursday, September 26, 2013 2:29 PM

Subject: [Vantage] Start Activity (Scan Barcode)

 

 

Back in Vantage 6 (who knew I would ever utter those words) 

You could scan one long bar code such as JOBXXX-ASSY-SEQ

 

And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.

 

 

Has anyone worked around this?

 

 

 

 

7
The Epicor Code is hard coded to tab to a specific control.Â


Jose C Gomez

Software Engineer


T: 904.469.1524 mobile
E: jose@…

http://www.josecgomez.com
     Â


Quis custodiet ipsos custodes?


On Mon, Sep 30, 2013 at 11:11 AM, Chang, Chia <cchang@...> wrote:

 
<div>
  
  
  <p></p><div><p class="ygrps-yiv-314997092MsoNormal"><span style="font-size:11.0pt;color:#1f497d;">Did you try customizing the tab number ordering so that it tabs in the correct order?<u></u><u></u></span></p><p class="ygrps-yiv-314997092MsoNormal"><span style="font-size:11.0pt;color:#1f497d;"><u></u>Â <u></u></span></p>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez

Sent: Monday, September 30, 2013 9:45 AM
To: Vantage
Subject: Re: [Vantage] Start Activity (Scan Barcode)

Â

Â

Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.



Jose C Gomez

Software Engineer

Â


T: 904.469.1524 mobile

E: jose@…
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?

Â

On Mon, Sep 30, 2013 at 10:41 AM, Tony Hughes <thughes281@...> wrote:

Â


Can you remove the combo boxes for assembly and sequence, and replace with text boxes?



From: Jose Gomez <jose@…>

To: Vantage <vantage@yahoogroups.com>

Sent: Thursday, September 26, 2013 2:29 PM

Subject: [Vantage] Start Activity (Scan Barcode)

Â

Â

Back in Vantage 6 (who knew I would ever utter those words)Â

You could scan one long bar code such as JOBXXX-ASSY-SEQ

Â

And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.

Â

Â

Has anyone worked around this?

Â

Â

Â

 

</div>
 


<div style="color:#fff;min-height:0;"></div>

8

Workaround is to add the number of needed scanning tabs to scan in the assembly and sequence in the correct order.

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez
Sent: Monday, September 30, 2013 10:15 AM
To: Vantage
Subject: Re: [Vantage] Start Activity (Scan Barcode)

 

 

The Epicor Code is hard coded to tab to a specific control. 



Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile


Quis custodiet ipsos custodes?

 

On Mon, Sep 30, 2013 at 11:11 AM, Chang, Chia <cchang@...> wrote:

 

Did you try customizing the tab number ordering so that it tabs in the correct order?

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez
Sent: Monday, September 30, 2013 9:45 AM
To: Vantage
Subject: Re: [Vantage] Start Activity (Scan Barcode)

 

 

Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.



Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile

E: jose@...
http://www.josecgomez.com
      

 

 

 

 

9
This may help you, but it's a little more work.
We use 2D barcodes containing several different pieces of information. So I created a field on every form that everyone scans into and created an on leave event that parses the data into the correct fields on the form using the forms dataview.
Â
     Dim OprNumX as EpiCombo = CType(csm.GetNativeControlReference("4469529c-d636-4205-b17a-def6a7469d8f"), EpiCombo)
     Dim edv As EpiDataView = CType(oTrans.EpiDataViews("Start"), EpiDataView)
     edv.dataView(edv.Row).BeginEdit()
     edv.dataView(edv.Row)("JobNum") = ParsedScan(0)
     edv.dataView(edv.Row)("AssemblySeq") = ParsedScan(1)
     edv.dataView(edv.Row).EndEdit()
     edv.Notify(New EpiNotifyArgs(oTrans, edv.Row, edv.Column))
     OprNumX.focus()
Â


On Mon, Sep 30, 2013 at 10:14 AM, Jose Gomez <jose@...> wrote:

 
<div>
  
  
  <p><div dir="ltr"><div style="font-family:verdana, sans-serif;font-size:small;" class="ygrps-yiv-1013325769gmail_default">The Epicor Code is hard coded to tab to a specific control. </div></div><div class="ygrps-yiv-1013325769gmail_extra"><br clear="all"><div>

Jose C Gomez

Software Engineer


T: 904.469.1524 mobile

E: jose@...

http://www.josecgomez.com
     Â


Quis custodiet ipsos custodes?


On Mon, Sep 30, 2013 at 11:11 AM, Chang, Chia <cchang@...> wrote:

 
<div>
  
  
  <p></p><div><p class="ygrps-yiv-1013325769MsoNormal"><span style="color:rgb(31,73,125);font-size:11pt;">Did you try customizing the tab number ordering so that it tabs in the correct order?<u></u><u></u></span></p><p class="ygrps-yiv-1013325769MsoNormal">

Â

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez

Sent: Monday, September 30, 2013 9:45 AM
To: Vantage
Subject: Re: [Vantage] Start Activity (Scan Barcode)

Â

Â

Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.



Jose C Gomez

Software Engineer

Â


T: 904.469.1524 mobile

E: jose@…
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?

Â

On Mon, Sep 30, 2013 at 10:41 AM, Tony Hughes <thughes281@...> wrote:

Â


Can you remove the combo boxes for assembly and sequence, and replace with text boxes?



From: Jose Gomez <jose@…>

To: Vantage <vantage@yahoogroups.com>

Sent: Thursday, September 26, 2013 2:29 PM

Subject: [Vantage] Start Activity (Scan Barcode)

Â

Â

Back in Vantage 6 (who knew I would ever utter those words)Â

You could scan one long bar code such as JOBXXX-ASSY-SEQ

Â

And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.

Â

Â

Has anyone worked around this?

Â

Â

Â

 

</div>
 


<div style="color:rgb(255,255,255);"></div>


</div>
 


<div style="color:rgb(255,255,255);min-height:0px;"></div>

10
Hey Scott
Thanks for that, I already offered a  similar solution but they want it to just work like it used to without modification its freaking stupid I keep telling them it requires a customization and they keep telling me "Talk to Epicor Support they need to have done this before."


Jose C Gomez
Software Engineer


T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?


On Mon, Sep 30, 2013 at 11:25 AM, Scotty K. <scottyk537@...> wrote:

 
<div>
  
  
  <p></p><div dir="ltr"><div>This may help you, but it&#39;s a little more work. </div><div>We use 2D barcodes containing several different pieces of information. So I created a field on every form that everyone scans into and created an on leave event that parses the data into the correct fields on the form using the forms dataview.</div>
Â
     Dim OprNumX as EpiCombo = CType(csm.GetNativeControlReference("4469529c-d636-4205-b17a-def6a7469d8f"), EpiCombo)
     Dim edv As EpiDataView = CType(oTrans.EpiDataViews("Start"), EpiDataView)
     edv.dataView(edv.Row).BeginEdit()
     edv.dataView(edv.Row)("JobNum") = ParsedScan(0)
     edv.dataView(edv.Row)("AssemblySeq") = ParsedScan(1)
     edv.dataView(edv.Row).EndEdit()

     edv.Notify(New EpiNotifyArgs(oTrans, edv.Row, edv.Column))
     OprNumX.focus()

Â


On Mon, Sep 30, 2013 at 10:14 AM, Jose Gomez <jose@…> wrote:

 
<div>
  
  
  <p></p><div dir="ltr"><div style="font-family:verdana, sans-serif;font-size:small;" class="ygrps-yiv-1411776831gmail_default">The Epicor Code is hard coded to tab to a specific control. </div></div><div class="ygrps-yiv-1411776831gmail_extra"><br clear="all">

Jose C Gomez

Software Engineer


T: 904.469.1524 mobile

E: jose@...

http://www.josecgomez.com
     Â


Quis custodiet ipsos custodes?


On Mon, Sep 30, 2013 at 11:11 AM, Chang, Chia <cchang@...> wrote:

 
<div>
  
  
  <p></p><div><p class="ygrps-yiv-1411776831MsoNormal"><span style="color:rgb(31,73,125);font-size:11pt;">Did you try customizing the tab number ordering so that it tabs in the correct order?<u></u><u></u></span></p><p class="ygrps-yiv-1411776831MsoNormal">

Â

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez

Sent: Monday, September 30, 2013 9:45 AM
To: Vantage
Subject: Re: [Vantage] Start Activity (Scan Barcode)

Â

Â

Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.



Jose C Gomez

Software Engineer

Â


T: 904.469.1524 mobile

E: jose@…
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?

Â

On Mon, Sep 30, 2013 at 10:41 AM, Tony Hughes <thughes281@...> wrote:

Â


Can you remove the combo boxes for assembly and sequence, and replace with text boxes?



From: Jose Gomez <jose@…>

To: Vantage <vantage@yahoogroups.com>

Sent: Thursday, September 26, 2013 2:29 PM

Subject: [Vantage] Start Activity (Scan Barcode)

Â

Â

Back in Vantage 6 (who knew I would ever utter those words)Â

You could scan one long bar code such as JOBXXX-ASSY-SEQ

Â

And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.

Â

Â

Has anyone worked around this?

Â

Â

Â

 

</div>
 


<div style="color:rgb(255,255,255);"></div>


<p></p></div>
 


<div style="color:rgb(255,255,255);"></div>


</div>
 


<div style="color:#fff;min-height:0;"></div>

11
We are 700b and have done a single barcode as well as individual barcodes on our job traveler. The issue we ran into is with one barcode is the scan gun we are using couldn't be programmed with a long enough delay and the mes terminal doesn't respond quick enough. This ends up putting the op in the assembly so with individual bar codes it works pretty well. We programmed a tab key around our barcode and so our users now scan the job then the assembly then the operation and it automatically goes to the next field and they are on their way.

From: Jose Gomez <jose@...>;
To: Vantage <vantage@yahoogroups.com>;
Subject: Re: [Vantage] Start Activity (Scan Barcode)
Sent: Mon, Sep 30, 2013 2:44:35 PM



Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.


Jose C Gomez
Software Engineer


T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?


On Mon, Sep 30, 2013 at 10:41 AM, Tony Hughes <thughes281@...> wrote:

 
<div>
  
  
  <p></p><div style="font-size:12pt;font-family:Courier New, courier, monaco, monospace, sans-serif;"><br>Can you remove the combo boxes for assembly and sequence, and replace with text boxes? <br><br><br><br><div style="font-family:Courier New, courier, monaco, monospace, sans-serif;font-size:12pt;">
From: Jose Gomez <jose@...>

To: Vantage <vantage@yahoogroups.com>

Sent: Thursday, September 26, 2013 2:29 PM

Subject: [Vantage] Start Activity (Scan Barcode)

 
<div>
  
  
  <div dir="ltr"><div style="font-family:verdana, sans-serif;font-size:small;">Back in Vantage 6 (who knew I would ever utter those words)Â </div><div style="font-family:verdana, sans-serif;font-size:small;">

You could scan one long bar code such as JOBXXX-ASSY-SEQ


And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.



Has anyone worked around this?




Jose C Gomez
Software Engineer


T: 904.469.1524 mobile

E: jose@...
http://www.josecgomez.com

     Â


Quis custodiet ipsos custodes?
</div>



</div>
 


<div style="color:#fff;min-height:0;"></div>



12

We ran into the same issue too and set the pause to a max of 3 seconds after the job number.  It works the majority of the time except like you said when the MES terminal doesn’t respond fast enough for the job validation process to verify before tabbing to the assembly field.

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jeff Boll
Sent: Wednesday, October 02, 2013 7:24 PM
To: vantage@yahoogroups.com; vantage@yahoogroups.com
Subject: Re: [Vantage] Start Activity (Scan Barcode)

 

 

We are 700b and have done a single barcode as well as individual barcodes on our job traveler. The issue we ran into is with one barcode is the scan gun we are using couldnx27;t be programmed with a long enough delay and the mes terminal doesnx27;t respond quick enough. This ends up putting the op in the assembly so with individual bar codes it works pretty well. We programmed a tab key around our barcode and so our users now scan the job then the assembly then the operation and it automatically goes to the next field and they are on their way.

 

From: Jose Gomez <jose@...>;
To: Vantage <vantage@yahoogroups.com>;
Subject: Re: [Vantage] Start Activity (Scan Barcode)
Sent: Mon, Sep 30, 2013 2:44:35 PM

 

 

Yeah but that doens't fix the notification events when you enter the job it automatically tabs to a specific field.



Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile


Quis custodiet ipsos custodes?

 

On Mon, Sep 30, 2013 at 10:41 AM, Tony Hughes <thughes281@...> wrote:

 


Can you remove the combo boxes for assembly and sequence, and replace with text boxes?


From: Jose Gomez <jose@...>
To: Vantage <vantage@yahoogroups.com>

Sent: Thursday, September 26, 2013 2:29 PM

Subject: [Vantage] Start Activity (Scan Barcode)

 

 

Back in Vantage 6 (who knew I would ever utter those words) 

You could scan one long bar code such as JOBXXX-ASSY-SEQ

 

And it would allow you to start the activity from that now with version 9 and even 8 the assembly and sequence are drop downs and the dataview triggers auto tabs when you type in a job number so you can't use a single barcode or even multiple barcodes to start the activity.

 

 

Has anyone worked around this?

 

 


Jose C Gomez

Software Engineer

 


T: 904.469.1524 mobile