Right Clicking for Part Tracker


(system) #1
Juliet,

We found the same thing. Actually none of the options work correctly Time
Phase, Purchase Advisor, Part Tracker, or Part Advisor. If the part is not
set up in the part master I know it usually shows up being grayed out. It
seems to be a glitch in the software. Are you usually wanting to look at one
of the assemblies on the Job? Or is it the final assembly?

Jim Frice

> -----Original Message-----
> From: Juliet Martin [mailto:jmartin@...]
> Sent: Wednesday, August 16, 2000 11:45 AM
> To: vantage@egroups.com
> Subject: [Vantage] Right Clicking for Part Tracker
>
>
> Someone in our shop pointed out a weird glitch. I was wondering if any
> of you have experienced this as well.
>
> In Vantage we will pull up a Job through Job Tracker. Regardless of
> whether or not we open the job up or just right click on the job in the
> list - when we try and right click to open with Part Tracker sometimes
> it will open, sometimes it will not.
>
> It happens to both Data Collection users and Office Users.
> It doesn't matter what Assembly we click on.
>
> Just curious if anyone else has seen this?
>
> Juliet Martin
> Rosenboom Machine & Tool, Inc.
> 1530 Western Avenue
> Sheldon, IA 51201
> 712-324-4854
> www.rosenboom.com
> jmartin@...

(system) #2
Someone in our shop pointed out a weird glitch. I was wondering if any
of you have experienced this as well.

In Vantage we will pull up a Job through Job Tracker. Regardless of
whether or not we open the job up or just right click on the job in the
list - when we try and right click to open with Part Tracker sometimes
it will open, sometimes it will not.

It happens to both Data Collection users and Office Users.
It doesn't matter what Assembly we click on.

Just curious if anyone else has seen this?

Juliet Martin
Rosenboom Machine & Tool, Inc.
1530 Western Avenue
Sheldon, IA 51201
712-324-4854
www.rosenboom.com
jmartin@...

(system) #3
I have noticed this too! What I found was certain times I have to have the
line with the part number highlighted in order for the part tracker to open.
I just left click on the line then right click to open the part tracker.

Kathy Hambleton
Electron Energy Corporation



-----Original Message-----
From: Juliet Martin [mailto:jmartin@...]
Sent: Wednesday, August 16, 2000 12:45 PM
To: vantage@egroups.com
Subject: [Vantage] Right Clicking for Part Tracker


Someone in our shop pointed out a weird glitch. I was wondering if any
of you have experienced this as well.

In Vantage we will pull up a Job through Job Tracker. Regardless of
whether or not we open the job up or just right click on the job in the
list - when we try and right click to open with Part Tracker sometimes
it will open, sometimes it will not.

It happens to both Data Collection users and Office Users.
It doesn't matter what Assembly we click on.

Just curious if anyone else has seen this?

Juliet Martin
Rosenboom Machine & Tool, Inc.
1530 Western Avenue
Sheldon, IA 51201
712-324-4854
www.rosenboom.com
jmartin@...



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)



[Non-text portions of this message have been removed]

(system) #4
I still can't get it to work. :-(
Thanks though! :-)

Juliet Martin
Rosenboom Machine & Tool, Inc.
1530 Western Avenue
Sheldon, IA 51201
712-324-4854
www.rosenboom.com
jmartin@...

Kathy Wrote:

I have noticed this too! What I found was certain times
I have to have the
line with the part number highlighted in order for the
part tracker to open.
I just left click on the line then right click to open
the part tracker.

Kathy Hambleton
Electron Energy Corporation

Juliet Wrote:

Someone in our shop pointed out a weird glitch. I was wondering
if any of you have experienced this as well.
In Vantage we will pull up a Job through Job Tracker.
Regardless of whether or not we open the job up or just right click on
the job in the list - when we try and right click to open with Part
Tracker sometimes it will open, sometimes it will not.
It happens to both Data Collection users and Office Users.
It doesn't matter what Assembly we click on.

Just curious if anyone else has seen this?

(system) #5
Juliet,

We have noticed the following, but not sure if this is what is happening
with you.......If you start in part tracker, then right click to go to job
tracker, then right click again and try to open a part tracker ..it will not
allow you to because you started in part tracker. If I did not explain
thoroughly, just contact me.

Joy Fekkes
Jaco, Inc

-----Original Message-----
From: Juliet Martin [mailto:jmartin@...]
: [Vantage] Right Clicking for Part Tracker


I still can't get it to work. :-(
Thanks though! :-)

Juliet Martin