Handhelds MC9190

Yahoo Archive
1
If you give each employee their own handheld and they have their own account to remote in to the App server then yes you can see which accounts are accessing. Ours are all going through one account, which does make it difficult if one handheld is having issues I don't know which one to logout from the app server.

Jordan
From: Michelle Chamberlain<mailto:mchamberlain@...>
Sent: �Friday�, �November� �01�, �2013 �9�:�28� �AM
To: Vantage Yahoo Group<mailto:vantage@yahoogroups.com>


One other question regarding the handhelds � Is there a way to track which employee is using what specific handheld?

Thanks in advance.

Michelle Chamberlain
ERP Analyst
Sabre Industries
Direct Line: (712) 224-1452
Phone: (712) 258-6690 ext. 11452
Fax: (712) 279-0817

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jordan Klassen
Sent: Thursday, October 24, 2013 12:48 PM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Handhelds MC9190



If your handhelds run the datawedge program, the settings for enter or tab are in there. I believe under "Basic"
Jordan

________________________________
[Bully Dog Logo]<http://www.bullydog.com>
Jordan Klassen | Information Technology
TEL: 940-783-9914 ext: 1828

________________________________

Confidentiality Notice: The information contained in this electronic message is privileged and confidential information intended only for the use of the individual entity or entities named as recipient or recipients. If the reader is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by electronic mail and permanently delete this message from your computer system. Thank you.

Disclaimer added by CodeTwo Exchange Rules 2010
www.codetwo.com<http://www.codetwo.com/?sts=1048>

From: vantage@yahoogroups.com<mailto:vantage@yahoogroups.com> [mailto:vantage@yahoogroups.com] On Behalf Of Michelle Chamberlain
Sent: Thursday, October 24, 2013 6:17 AM
To: vantage@yahoogroups.com<mailto:vantage@yahoogroups.com>
Subject: [Vantage] Handhelds MC9190

Is there a way to change the "Enter" key on the handhelds to become a "Tab" key? Or is there a "Tab" key already programmed on the handhelds that I am not seeing?

Thanks

Michelle Chamberlain
ERP Analyst
Sabre Industries
Direct Line: (712) 224-1452
Phone: (712) 258-6690 ext. 11452
Fax: (712) 279-0817

[Non-text portions of this message have been removed]





________________________________
[Bully Dog Logo]<http://www.bullydog.com>
Jordan Klassen | Information Technology
TEL: 940-783-9914 ext: 1828

________________________________

Confidentiality Notice: The information contained in this electronic message is privileged and confidential information intended only for the use of the individual entity or entities named as recipient or recipients. If the reader is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by electronic mail and permanently delete this message from your computer system. Thank you.

Disclaimer added by CodeTwo Exchange Rules 2010
www.codetwo.com<http://www.codetwo.com/?sts=1048>



[Non-text portions of this message have been removed]
2

Is there a way to change the “Enter” key on the handhelds to become a “Tab” key?  Or is there a “Tab” key already programmed on the handhelds that I am not seeing?

 

Thanks

 

Michelle Chamberlain

ERP Analyst

Sabre Industries

Direct Line:  (712) 224-1452

Phone: (712) 258-6690 ext. 11452

Fax: (712) 279-0817

 

3
We have an older model of the MC9000 series and we found that a tap on the screen acts as a “Tab”.
The tap may have to be in the field that you want to “Tab” out of.
 
Bob Lake
Metalworks
 
Sent: Thursday, October 24, 2013 8:17 AM
Subject: [Vantage] Handhelds MC9190
 
 

Is there a way to change the “Enter” key on the handhelds to become a “Tab” key?  Or is there a “Tab” key already programmed on the handhelds that I am not seeing?

Thanks

Michelle Chamberlain

ERP Analyst

Sabre Industries

Direct Line:  (712) 224-1452

Phone: (712) 258-6690 ext. 11452

Fax: (712) 279-0817

4

There’s usually a configuration change you can make to change the behavior after a scan (ie: send tab instead of send enter).  Models I’ve worked with in the past had a page in the manual that contained a bar code – you simply scanned that bar code and it changed the behavior to a TAB.   Have you read through the manual for this model?

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Michelle Chamberlain
Sent: Thursday, October 24, 2013 8:17 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Handhelds MC9190

 

 

Is there a way to change the “Enter” key on the handhelds to become a “Tab” key?  Or is there a “Tab” key already programmed on the handhelds that I am not seeing?

 

Thanks

 

Michelle Chamberlain

ERP Analyst

Sabre Industries

Direct Line:  (712) 224-1452

Phone: (712) 258-6690 ext. 11452

Fax: (712) 279-0817

 

5

We are using CE 6.0 on MC9190 and we have to install the DataWedge software (got from Motorola).

 

1.       Install DataWedge and run on the host with the handheld in the cradle.

2.       Warm boot Handheld.

3.       On the handheld,go to Control Panel.
Click the ScanWedge icon and select
Configà Setup to configure the ScanWedge utility
Note the new icon in the system tray.  The laser will now be seen when the trigger is pressed on the barcode gun.
IMPORTANT: Do not ever point the laser in to someone’s eyes. All lasers are dangerous!!

4.       Click ‘Running” to where it is yes and the status is READY.

5.       Select “Basic Configuration”

6.       Select “3. Basic Format”.

7.       Remove check from “7. Send ENTER” key

8.       Add check “6. Send TAB key”.

9.       Select “0. Back”

10.   Select “0. Exit”

11.   Test with Microsoft WordPad on Handheld desktop.

 

Hopefully helpful,

 

 

 

William R. King
IT Analyst
Topura America Fastener, Inc.

 

 

 

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of SimsTrak Consulting
Sent: Thursday, October 24, 2013 8:09 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Handhelds MC9190

 

 

There’s usually a configuration change you can make to change the behavior after a scan (ie: send tab instead of send enter).  Models I’ve worked with in the past had a page in the manual that contained a bar code – you simply scanned that bar code and it changed the behavior to a TAB.   Have you read through the manual for this model?

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Michelle Chamberlain
Sent: Thursday, October 24, 2013 8:17 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Handhelds MC9190

 

 

Is there a way to change the “Enter” key on the handhelds to become a “Tab” key?  Or is there a “Tab” key already programmed on the handhelds that I am not seeing?

 

Thanks

 

Michelle Chamberlain

ERP Analyst

Sabre Industries

Direct Line:  (712) 224-1452

Phone: (712) 258-6690 ext. 11452

Fax: (712) 279-0817

 

6
If your handhelds run the datawedge program, the settings for enter or tab are in there. I believe under "Basic"
Jordan



________________________________
[Bully Dog Logo]<http://www.bullydog.com>
Jordan Klassen | Information Technology
TEL: 940-783-9914 ext: 1828

________________________________

Confidentiality Notice: The information contained in this electronic message is privileged and confidential information intended only for the use of the individual entity or entities named as recipient or recipients. If the reader is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by electronic mail and permanently delete this message from your computer system. Thank you.

Disclaimer added by CodeTwo Exchange Rules 2010
www.codetwo.com<http://www.codetwo.com/?sts=1048>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Michelle Chamberlain
Sent: Thursday, October 24, 2013 6:17 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Handhelds MC9190


Is there a way to change the "Enter" key on the handhelds to become a "Tab" key? Or is there a "Tab" key already programmed on the handhelds that I am not seeing?

Thanks

Michelle Chamberlain
ERP Analyst
Sabre Industries
Direct Line: (712) 224-1452
Phone: (712) 258-6690 ext. 11452
Fax: (712) 279-0817




[Non-text portions of this message have been removed]
7

One other question regarding the handhelds – Is there a way to track which employee is using what specific handheld?

 

Thanks in advance.

 

Michelle Chamberlain

ERP Analyst

Sabre Industries

Direct Line:  (712) 224-1452

Phone: (712) 258-6690 ext. 11452

Fax: (712) 279-0817

 

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jordan Klassen
Sent: Thursday, October 24, 2013 12:48 PM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Handhelds MC9190

 

 

If your handhelds run the datawedge program, the settings for enter or tab are in there. I believe under "Basic"
Jordan

________________________________
[Bully Dog Logo]<http://www.bullydog.com>
Jordan Klassen | Information Technology
TEL: 940-783-9914 ext: 1828

________________________________

Confidentiality Notice: The information contained in this electronic message is privileged and confidential information intended only for the use of the individual entity or entities named as recipient or recipients. If the reader is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by electronic mail and permanently delete this message from your computer system. Thank you.

Disclaimer added by CodeTwo Exchange Rules 2010
www.codetwo.com<http://www.codetwo.com/?sts=1048>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Michelle Chamberlain
Sent: Thursday, October 24, 2013 6:17 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Handhelds MC9190

Is there a way to change the "Enter" key on the handhelds to become a "Tab" key? Or is there a "Tab" key already programmed on the handhelds that I am not seeing?

Thanks

Michelle Chamberlain
ERP Analyst
Sabre Industries
Direct Line: (712) 224-1452
Phone: (712) 258-6690 ext. 11452
Fax: (712) 279-0817

[Non-text portions of this message have been removed]