Drop Ship


(system) #1
Eric,

About this reply you sent me last week. When we send something
directly to our customer from our vendor (Drop Ship) we still need to do a
"fake" reception of the material and a "fake" packing slip, correct?

Martin Nijdam (Jr. Ing.)
Suss Woodcraft Int'l
(514) 363-3565

> -----Original Message-----
> From: Eric Tolliver [SMTP:e.tolliver@...]
> Sent: Friday, August 04, 2000 5:45 PM
> To: vantage@egroups.com
> Subject: RE: [Vantage] Drop Ship
>
> Martin,
>
> When you generate a new PO and your at the header screen where you input
> the
> company you are purchasing from, the right side has the ship to addressee
> by
> default it shows your facility, but right under that you can choose from
> Customer, Plant, or Vendor addresses to populate for the ship to.
>
> Eric Tolliver
> IT\MIS
> Continental Industries Inc.
> 5456 E. Mcdowell Rd.
> Mesa, Az 85215
> http://ciirelays.com/
> mailto:e.tolliver@...
>
>
>

(system) #2
Is anybody having to dropship parts from a vendor to a customer?
We have a customer that orders a tube from us, and we order the tube cut
to length from our vendor, and they ship it directly to our customer.
How would we set this up in Vantage 3.00.632? Any ideas would be
greatly appreciated.

(system) #3
Randy,

Are you planning on going to 4.0 soon? If so that feature is built in.



Eric Tolliver
IT\MIS
Continental Industries Inc.
5456 E. Mcdowell Rd.
Mesa, Az 85215
http://ciirelays.com/
mailto:e.tolliver@...

-----Original Message-----

Is anybody having to dropship parts from a vendor to a customer?
We have a customer that orders a tube from us, and we order the tube cut
to length from our vendor, and they ship it directly to our customer.
How would we set this up in Vantage 3.00.632? Any ideas would be
greatly appreciated.

(system) #4
We have several customers that are drop shipped by our vendors. We create a
sales order that pulls from inventory rather than make from a job. A PO is
made with the vendor. The PO directs our vendor to notify us when the
shipment is made; we receive a copy of the packing slip. Next, a receipt
against the PO is made. Finally we create a packing slip in Vantage and bill
the customer. Hope this helps.

Jim Stetter

-----Original Message-----
From: Randy Duly [mailto:randyd@...]
Sent: Friday, August 04, 2000 3:20 PM
To: Vantage List (E-mail)
Subject: [Vantage] Drop Ship


Is anybody having to dropship parts from a vendor to a customer?
We have a customer that orders a tube from us, and we order the tube cut
to length from our vendor, and they ship it directly to our customer.
How would we set this up in Vantage 3.00.632? Any ideas would be
greatly appreciated.




[Non-text portions of this message have been removed]

(system) #5
Really! How?

Martin Nijdam (Jr. Ing.)
Suss Woodcraft Int'l
(514) 363-3565

> -----Original Message-----
> From: Eric Tolliver [SMTP:e.tolliver@...]
> Sent: Friday, August 04, 2000 3:50 PM
> To: vantage@egroups.com
> Subject: RE: [Vantage] Drop Ship
>
> Randy,
>
> Are you planning on going to 4.0 soon? If so that feature is built in.
>
>
>
>
> -----Original Message-----
>
> Is anybody having to dropship parts from a vendor to a customer?
> We have a customer that orders a tube from us, and we order the tube cut
> to length from our vendor, and they ship it directly to our customer.
> How would we set this up in Vantage 3.00.632? Any ideas would be
> greatly appreciated.
>
>
>
>

(system) #6
Martin,

When you generate a new PO and your at the header screen where you input the
company you are purchasing from, the right side has the ship to addressee by
default it shows your facility, but right under that you can choose from
Customer, Plant, or Vendor addresses to populate for the ship to.

Eric Tolliver
IT\MIS
Continental Industries Inc.
5456 E. Mcdowell Rd.
Mesa, Az 85215
http://ciirelays.com/
mailto:e.tolliver@...


Really! How?

>
> Randy,
>
> Are you planning on going to 4.0 soon? If so that feature is built in.
>
>
> Is anybody having to dropship parts from a vendor to a customer?
> We have a customer that orders a tube from us, and we order the tube cut
> to length from our vendor, and they ship it directly to our customer.
> How would we set this up in Vantage 3.00.632? Any ideas would be
> greatly appreciated.
>
>